The NanoPi NEO Plus2 is another Allwinner based ARM board developed by FriendlyElec. It uses Allwinner's 64-bit quad-core A53 SoC with hexa-core Mali450 GPU and features 1GB of DDR3 RAM and 8GB eMMC.
With a small size of only 40 x 52mm the NanoPi NEO Plus2 has rich on-board resources: AP6212A WiFi & Bluetooth module, Gbps Ethernet and two USB hosts. It supports system-boot from a MicroSD card.
The NanoPi NEO Plus2 has a carefully designed power system and 6-layer PCB layout. These features enhance the board's heat dissipation.
The NanoPi NEO Plus2 meets popular IOT applications requirements for small size, high-speed and large throughput data transmission and high performance computing.
Link to purchase:NanoPi NEO Plus2
GPIO Pin Spec
Pin# | Name | Linux gpio | Pin# | Name | Linux gpio |
1 | SYS_3.3V | 2 | VDD_5V | ||
3 | I2C0_SDA / GPIOA12 | 12 | 4 | VDD_5V | |
5 | I2C0_SCL / GPIOA11 | 11 | 6 | GND | |
7 | GPIOG11 | 203 | 8 | UART1_TX / GPIOG6 | 198 |
9 | GND | 10 | UART1_RX / GPIOG7 | 199 | |
11 | UART2_TX / GPIOA0 | 0 | 12 | GPIOA6 | 6 |
13 | UART2_RTS / GPIOA2 | 2 | 14 | GND | |
15 | UART2_CTS / GPIOA3 | 3 | 16 | UART1_RTS / GPIOG8 | 200 |
17 | SYS_3.3V | 18 | UART1_CTS / GPIOG9 | 201 | |
19 | SPI0_MOSI / GPIOC0 | 64 | 20 | GND | |
21 | SPI0_MISO / GPIOC1 | 65 | 22 | UART2_RX / GPIOA1 | 1 |
23 | SPI0_CLK / GPIOC2 | 66 | 24 | SPI0_CS / GPIOC3 | 67 |
USB/Audio/IR Pin Description
NanoPi NEO Plus2 | ||
Pin# | Name | Description |
1 | VDD_5V | 5V Power Out |
2 | USB-DP1 | USB1 DP Signal |
3 | USB-DM1 | USB1 DM Signal |
4 | USB-DP2 | USB2 DP Signal |
5 | USB-DM2 | USB2 DM Signal |
6 | GPIOL11 / IR-RX | GPIOL11 or IR Receive |
7 | SPDIF-OUT / GPIOA17 | GPIOA17 or SPDIF-OUT |
8 | PCM0_SYNC / I2S0_LRC | I2S / PCM Sample Rate Clock/Sync |
9 | PCM0_CLK / I2S0_BCK | I2S / PCM Sample Rate Clock |
10 | PCM0_DOUT / I2S0_SDOUT | I2S / PCM Serial Data Output |
11 | PCM0_DIN / I2S0_SDIN | I2S / PCM Serial Data Input |
12 | GND | 0V |
Audio
Pin# | Name | Description |
1 | MICIN1P | Microphone Positive Input |
2 | MICIN1N | Microphone Negative Input |
3 | LINEOUTR | LINE-OUT Right Channel Output |
4 | GND | 0V |
5 | LINEOUTL | LINE-OUT Left Channel Output |
Debug Port(UART0)
Pin# | Name |
1 | GND |
2 | VDD_5V |
3 | UART_TXD0 / GPIOA4 |
4 | UART_RXD0 / GPIOA5 / PWM0 |
Please visit our official site: www.friendlyarm.com to place orders .By default we ship via CHINA POST. It takes up to one month for CHINA POST to ship. If you want us to ship via DHL/Fedex/TNT/UPS please email us at sales@friendlyarm.com